PTFE PFA Lined Diaphragm Valve for Sulfuric Acid
YFM lined diaphragm valve adopt special technology by lined PFA/FEP on body, diaphragm is made of PFA/FEP and EPDM thus all wetted parts are reach same performance of corrosion resistance. This valve has good at throttles with advantage of corrosion resistance and abrasion resistance, reliable sealing performance and widely used in corrosive medium, fiber, powder etc.
Less parts and good performance
Open limitation conveniently, flexibly, precisely
Fine body structure for easy assembly and maintenance.
All wetted parts are lined by fluorine, totally isolate from medium to avoid any corrosion on body.
Weir type YFMG41PFA
Select Body Material:
Carbon Steel WCB PFA lined
Stainless Steel SS304 PFA lined
1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4”(DN32),1 1/2" (DN40), 2" (DN50), 2 1/2" (DN65), 3" (DN80), 4" (DN100), 5”(DN125),6" (DN150),8”(DN200),10”(DN250)
- Less parts and good performance
- Ability of leak tight shut-off against gases,liquids and solids
- Resistance to abrasion and erosion
- Non-turbulent flow path
- Low fluid friction loss
- Fast throttle
- Vacuum capability
- Maintenance -in-line servicing, low cost spares
- Open limitation conveniently, flxibly, precisely
Handwheel sized for comfortable grip and easy operation
Sealed to atmosphere bonnet option available
Wide range of body materials available
Paint fifinish resists environmental attack
Wide choice of diaphragm materials provide positive shut-off and isolate all bonnet working parts from the line fluid
Reinforced diaphragms give long life and leak free operation
Body end connections –screwed, flflanged or weld end options to various international standards
Many valve lining options available Lower cost than alloy options
Pocketless design for smooth flow characteristics
Compressor supports the diaphragm in all positions for longer life
Valve indicator gives clear indication of valve position
Lubricated for long life Lipseal prevents ingress of dust, dirt and atmospheric pollutants
On pressure and vacuum, YFM diaphragm valves operate and close 100% leaktight even after thousands of operations. This feature reduces
processing and handling costs, by eliminating emissions normally associated with conventional valve designs.
All working parts of the valves are isolated from the line media and positive closure is obtained even on frequent cycling or with entrained
particulates in the line unlike quarter turn ball and butterfly valves. Throttling and control characteristics are enhanced by a streamlined flow path
that is cavity free and provides excellent flow control capabilities.Extended life, reliability, safety and ease of use, combined with an essentially
simple design, results in low maintenance for minimum running cost.