BLOG

Quick answer: Protect the exposed fluoropolymer sealing surfaces throughout PTFE lined ball valve installation. Align the mating flanges before tightening, remove debris that could gouge the liner, and tighten bolts evenly using the procedure and torque specified for the valve. Never use flange bolts to correct piping misalignment. Which Installation Mistakes Can Damage a PTFE […]

Quick Answer: Choose a corrosion resistant valve based on the conditions at each stage. Chlorine dioxide bleaching and black liquor recovery place different chemical and mechanical demands on a valve. The liner, valve design, and operating limits therefore need to be checked for each service. How Does Chlorine Dioxide Affect Valve Selection in the Bleaching […]

Quick Answer: Match the valve type and liner construction to the slurry chemistry, solids, temperature, pressure, and operating duty. Butterfly valves are commonly used for many FGD duties, but abrasive service and flushing requirements also need consideration. YOUFUMI offers PTFE/PFA/FEP-lined butterfly valves, including a lug design listed for slurry applications. Why Is FGD Such a […]

Quick answer: PTFE, PFA, and FEP can all work in a corrosion resistant valve for textile dyeing or bleaching, depending on the process conditions. The liner alone does not determine suitability. YOUFUMI offers lined control ball valves with PFA or FEP lining and PTFE seats and packing. How Do Textile Dyeing Chemicals Affect Fluoropolymer Liners? […]

Quick answer: Acid concentration, temperature, pressure, solids, and valve design all affect selection. Above 120°C, check the complete valve’s pressure-temperature rating instead of relying on the chemical resistance of PTFE or PFA alone. What Happens to PTFE and PFA Above 120°C on Pickling Lines? Neither PTFE nor PFA suddenly fails at 120°C. A fluoropolymer can […]

Quick answer： First, confirm if the liner is compatible with the chemical at its actual concentration and temperature. Then, check the valve’s pressure-temperature rating and sealing requirements. For wet-process phosphoric acid, account for suspended solids and impurities. For ammonia, specify whether it is aqueous or anhydrous and liquid or gas before choosing the valve. What […]

Quick answer: A PTFE lined sight glass specification should include the nominal size, pressure class, operating and design temperatures, and lining thickness requirement. You also need to identify the process chemical and its concentration so the lining, glass, and seals can be checked for compatibility. Specify any vacuum conditions separately. What Are the Four Basic […]

Quick answer: Ceramic generally lasts longer when abrasion from hard solids is the main cause of wear. PTFE can perform better when chemical compatibility or impact conditions are the limiting factors. Actual service life depends on factors such as slurry chemistry, flow velocity, solids concentration, particle characteristics, and valve design. Why Does Slurry Wear Out […]

Quick answer： Choose a Y-type for smaller debris loads and infrequent cleaning, a T-type when installation or maintenance space is limited, and a basket strainer when you need greater debris capacity and longer intervals between cleaning. What Is the Difference Between Y-Type, T-Type, and Basket Strainers? The main difference is where each design collects debris […]

Quick answer: PTFE is usually the more economical choice for general corrosive service when severe permeation isn’t a concern. PFA is better suited to higher temperatures, highly permeating chemicals such as HF, and ultra-high-purity applications. YOUFUMI supplies PTFE/PFA lined valves for corrosive service, with the appropriate liner depending on the application. The One Question That […]

Quick Answer South Africa’s mining and chemical sectors keep driving demand for lined valve manufacturers South Africa buyers can trust for abrasive slurry and corrosive chemical service. YOUFUMI leads this list as a factory-direct PTFE lined valve South Africa option, giving buyers documented, repeatable lining specifications across every order. South Africa has become a major […]

Quick Answer Brazil’s chemical, mining, and pulp sectors keep driving demand for South American valve suppliers that handle corrosive and abrasive process media. YOUFUMI leads this list as a PTFE lined valve Brazil option. The company ships factory-direct valves with consistent lining specifications to buyers across the region. The Brazilian industrial belt covers everything from […]