BLOG

Quick answer: Protect the exposed fluoropolymer sealing surfaces throughout PTFE lined ball valve installation. Align the mating flanges before tightening, remove debris that could gouge the liner, and tighten bolts evenly using the procedure and torque specified for the valve. Never use flange bolts to correct piping misalignment. Which Installation Mistakes Can Damage a PTFE […]

Quick Answer: Match the valve type and liner construction to the slurry chemistry, solids, temperature, pressure, and operating duty. Butterfly valves are commonly used for many FGD duties, but abrasive service and flushing requirements also need consideration. YOUFUMI offers PTFE/PFA/FEP-lined butterfly valves, including a lug design listed for slurry applications. Why Is FGD Such a […]

Quick answer: PTFE, PFA, and FEP can all work in a corrosion resistant valve for textile dyeing or bleaching, depending on the process conditions. The liner alone does not determine suitability. YOUFUMI offers lined control ball valves with PFA or FEP lining and PTFE seats and packing. How Do Textile Dyeing Chemicals Affect Fluoropolymer Liners? […]

Quick answer: A PTFE lined sight glass specification should include the nominal size, pressure class, operating and design temperatures, and lining thickness requirement. You also need to identify the process chemical and its concentration so the lining, glass, and seals can be checked for compatibility. Specify any vacuum conditions separately. What Are the Four Basic […]

Quick Answer: A PTFE expansion joint is a flexible connector that absorbs pipe movement while its PTFE liner resists chemical attack. These joints meet international standards such as ISO 10619 and ASTM F1545 for pressure and temperature ratings. YOUFUMI manufactures PTFE lined expansion joints rated for temperatures up to 150°C and pressures up to 1.6 […]

Quick Answer A PTFE lined pipe provides superior corrosion resistance and higher temperature limits than FRP pipe but at a higher upfront cost. Meanwhile, FRP offers faster, lower-cost installation for moderate-duty applications The PTFE lined steel pipe has a structural shell and an inert PTFE liner. It can handle almost all industrial chemicals at temperatures […]

Quick Answer Installing PTFE- lined piping requires correct alignment, clean sealing faces, controlled bolt loading, and planned re-tightening. Excessive torque, pipe strain, or damaged flares from incorrect installation may lead to excessive torque, pipe strain, or damaged flares. These can permanently deform the liner and create leaks.  Youfumi PTFE lined pipe products are engineered to […]

Specifying pipeline valves requires full API 6D compliance to prevent catastrophic high-pressure ruptures. Some leading api 6d ball valve manufacturer options include the likes ONERO Valve, Tianyu Valves, and Xintai Valve Group, to name a few. These specialized operations engineer heavy-duty trunnion configurations designed for severe isolation environments. What Is API 6D Certification? The API […]

Steam globe valves are the top pick for steam pipelines because they throttle flow in small steps, seal tight when closed, and hold up under constant heat cycling. Gate and ball valves wear out fast under those same conditions. What Is a Steam Globe Valve? A steam globe valve is a linear-motion valve built to […]

Say your line’s carrying hot chlorine gas, wet chlorine, or boiling nitric acid. Plain steel won’t last long against any of those. A hastelloy valve solves this with a nickel-molybdenum-chromium alloy that’s inert to the chemical itself. Fluoropolymer linings solve it differently, often by blocking the chemical from ever touching the steel underneath. What Makes […]

Control valve symbols on a P&ID are read by starting with the basic bow-tie body shape, then checking the internal marker for valve type, the tag number for identification, and the actuator symbol for control method. Together, these elements tell you what the valve does, how it operates, and where it fits into the overall […]

This guide shows how to read valve marks on pipe plans and P&ID pages. It explains why they matter, what details to check and how to read them in real work. A valve mark is small, but it gives key data. It can show the valve type, flow path, control role and place in the […]